Netgear ex6150 Setup, Manual, Firmware Update and Resetting
Netgear ex6150 Setup
Netgear ex6150 Setup skillfully caters to all your Wi-Fi requirements. With this extender, you can create a mesh network using your existing Wi-Fi network and extend it to all parts of your house. Its most significant feature is the dual Wi-Fi bands (2.4GHz and 5GHz) which helps create a single and powerful high- speed internet connection.
Netgear ex6150 Setup: Manual
Switch on your Netgear ex6150 extender. Make sure to place your extender close to the Wifi router. Next, plug the extender into an electrical outlet. Wait till the Power LED lights green.
If the Power LED fails to light, you can press the Power button.
You can use a Wifi or Ethernet connection to connect the extender to your computer or mobile device.
Launch a web browser and enter www.mywifiext.net on your computer or mobile device. Following this, the Netgear installation assistant displays. Connect your extender to the available Wifi network, following the prompts
Move your extender to any location of your preference. If you fail to get connected or receive poor connection, move the extender closer to your router and wait till the LED lights white. Once you find the best location for your extender, connect your client devices to the extended Wifi network.
Need some assistance, then get in touch with us to assist you.
Netgear ex6150 Firmware Update
In order to avoid wireless disconnection issues and other interruptions during the Netgear ex6150 Firmware Updating process, it is advisable to perform the process on a computer with a wired connection.
Log in the extender entering http://mywifiext.net and click on Firmware Update.
Find “Upload Update File” and click “Browse” to locate the file you just downloaded.
Upload the file. Do not interrupt the up-gradation process while the firmware is loading. The Netgear ex6150 extender automatically reboots when the upgrade is complete.
After the extender boots up and the power LED becomes steady green, log in the extender again.
In case of queries, do not hesitate to get in touch with the experts for on the spot solution. We are available 24×7.
Resetting Netgear ex6150
Netgear ex6150 reset to the default setting in two ways. One is by pressing the Factory Reset button and two, by using the web user interface or (GUI).
Factory Reset button:
Find an object like a pen or a paperclip.
Look for the Factory Reset button at the bottom of the extender. Press and hold the reset button with the paper clip or pen. Now, wait for at least 5 seconds or until the Device to Extender LED blinks amber.
Release the Factory Reset button and wait till the extender reboots. Once rebooted, your extender will be reset to its factory default settings.
Ensure using a computer that is connected to the extender via a wired or wireless connection.
Launch your internet browsers such as Internet Explorer, Google Chrome or Mozilla Firefox.
Enter mywifiext.net in the address bar of the internet browser.
Type your email and password on the log in page and click Log In.
First click Settings then Other Settings, on the Netgear genie page.
Click Reset and then Yes to proceed.
Wait for the web user interface to finish resetting the device to factory default settings.
If it still does not work, do not hesitate to chat or get in touch with the experts for tech support. You can call us.